PRODUCTSHose
KanaDuct 620 (620WD)
SPECIFICATIONS
- General ducting and blower hose with metal wire helix
- Temp. Range: -40°F to 220°F
- Applications: General ducting and blower applications. For use with lightweight abrasives such as sawdust, grass clippings, street refuse and cotton pickers
- Construction: EPDM rubber, metal wire helix, smooth bore, slightly corrugated O.D
- Features: Rated to 220°F. Abrasion resistant yet very flexible. 100% rubber sidewall (no fabric)
AVAILABLE SIZES
| Inside Dia. | Outside Dia. | Pitch | Minimum Bend Radius |
Working Pressure |
Vacuum Rating |
Weight | Standard Length |
|---|---|---|---|---|---|---|---|
| Inches | Inches | Inches | 72°F, Inches | 72°F, P.S.I. | 72°F, In Hg | Lbs/Ft | Ft |
| 2 | 2.36 | 0.43 | 2.0 | 12 | 12.0 | 0.40 | 50 |
| 2-1/2 | 3.00 | 0.58 | 3.0 | 12 | 9.0 | 0.44 | 50 |
| 3 | 3.37 | 0.60 | 3.0 | 12 | 8.0 | 0.55 | 50 |
| 4 | 4.39 | 0.65 | 4.0 | 9 | 6.0 | 0.73 | 50 |
| 5 | 5.43 | 0.88 | 5.0 | 7 | 5.0 | 0.84 | 50 |
| 6 | 6.36 | 0.87 | 6.0 | 6 | 4.0 | 1.04 | 50 |
| 7 | 7.32 | 0.89 | 7.0 | 5 | 4.0 | 1.17 | 50 |
| 8 | 8.35 | 0.92 | 8.0 | 4 | 4.0 | 1.38 | 50 |
| 10 | 10.45 | 1.02 | 10.0 | 3 | 4.0 | 2.40 | 50 |
| 12 | 12.40 | 1.20 | 12.0 | 3 | 4.0 | 2.50 | 25 |
*Over flexing or repeated flexing of hose within 18″ of fitting is a common cause of hose failure. Installing a 12″-14″ section of our Banding Coil at the end of the hose should be considered. Kanaflex will not be responsible for damage to hose due to over flexing.